F3
Front sub-pump right
F3-3501140
The function of the car caliper: It has the functions of decelerating, stopping or maintaining the stopped state of the moving wheels. Generally, it is only used in the disc brake system. It is the part that protrudes from the outside of the brake pad and can enhance the braking performance.
Inquire Now
Back plate
F3-3502102/59
The brake disc, in simple terms, is a round disc that rotates when the car is moving. The brake caliper clamps the brake disc to generate braking force. When the brake is applied, it clamps the brake disc to slow down or stop.
Back film
F3-3502001-C3
Car brake pads, also known as car brake pads, refer to the friction materials fixed on the brake drum or brake disc that rotates with the wheels. The friction linings and friction pads are subjected to external pressure and generate friction to achieve vehicle deceleration. Purpose.
Vacuum booster
F3-3540010
F3,F3R,G3,L3,G3R,new F3,third generation F3
Master cylinder
F3-3505200
The function of the master cylinder is to convert the mechanical energy into the pressure of the brake fluid in the brake oil pipe
ABS pump
F3-3550100
The main function of ABS is to improve the braking performance of the whole vehicle, improve the driving safety, and prevent the wheels from locking (that is, stop rolling) during the braking process, so as to ensure that the driver can still control the direction when braking, and prevent the rear axle. sideslip.
After ABS sensor
F3-4013100-A1
ABS sensor front
F3-3630120
Handbrake line
F3-3508500
The car handbrake cable generally passes through the handbrake and then through the chassis. Then reach the position of the brake pads of the rear wheel. Generally, it acts on the rear wheels. The next line from the cab to the rear axle package is the brake line. This line is obviously different from the wire.
Brake switch F3
F3-3504030
The more common brake light switch sends a level signal through its own on-off to prompt the relevant system action or control the power on-off function of the brake light.
Half shaft assembly left
IB5-2203010
The key role of the half shaft is to transmit power. The axle shafts transfer torque from the differential to the wheels, which drive the car.
Half shaft assembly right
IB5-2203020
Outer cage
F3-2203012-C1
The fixed ball cage universal joint (RF joint) is characterized in that in the process of transmitting torque, the main and driven shafts can only rotate relative to each other without axial displacement. It is usually used near the wheel. , which is what we often call the outer cage
Inner cage
F3-2203014
The telescopic ball cage universal joint (VL joint) is characterized in that in the process of transmitting torque, the main and driven shafts can not only rotate relative to each other, but also produce axial displacement. It is usually used close to the drive axle. , which is what we often call the inner cage.
Front bumper skeleton
F3-2803010/70
The anti-collision steel beam is a device used to reduce the impact energy absorbed by the vehicle when it is collided.
Hood lock bracket
F3-8402100/70
It is fixed on the front wall of the car or on the frame of the water tank, which is convenient for checking the fault of the engine compartment.
Car Brand
Spare Parts
Agent Brand
Get a Quote
Quick Links
Product Category
Contact Us
Tel: +86 18660183999
Email: admin@cnjkautoparts.com
Add.: No. 299, Jisheng Road, Xuancheng Economic and Technological Development Zone, Anhui Province, China
Subscribe Newsletter
Welcome to subscribe to our email message!
Geely 
Chang An 
BYD 
Chery 
Lifan 
Brilliance 
MG 
Great Wall 
FAW 
JAC 
GAC 
SGM 
BAIC 
DFAC 
Chana 
Hafei 
Roewe 
Haima 
Zotye 
Suzuki 
NIO 
Polestar 
Aiways 
Hong Qi 
Xiaopeng 
Leapmotor 
auto sheet metal parts 
dismantled original parts 
Driver Shaft