Oil pump

473QA-1011020

The oil in the oil pan is pressurized and then pumped to the oil filter and each lubricating oil passage to lubricate the main moving parts of the engine and filter the oil. When the engine is working, the oil pump works continuously, so that the oil circulates continuously in the lubricating oil circuit.

Inquire Now

Oil plug

473QA-3611100

The function of the oil sensing plug is to detect the oil pressure of the vehicle engine, and the detected data can help control the normal operation of the engine.

Inquire Now

Machine filter

471Q-1012950

F3, F3R, G3

Inquire Now

Water pump

471Q-1307950

The function of the automobile water pump is to pressurize the coolant to ensure that it circulates in the coolant. In layman's terms, it is to let the water continuously circulate through the various parts of the radiator engine block to take away heat and ensure that the engine is not high temperature.

Inquire Now

Thermostat

471Q-1306950

The most direct function of the thermostat is to control the temperature of the engine coolant and intake air.

Inquire Now

Front engine gasket

IB5-1001100

Eliminate the resonance generated when the engine is working; reduce the hydraulic oil pressure.

Inquire Now

After the engine gasket

IB5-1001400

Eliminate the resonance generated when the engine is working; reduce the hydraulic oil pressure.

Inquire Now

Engine gasket left

IB5-1001500

Eliminate the resonance generated when the engine is working; reduce the hydraulic oil pressure.

Inquire Now

Engine gasket right

IB5-1001040

Eliminate the resonance generated when the engine is working; reduce the hydraulic oil pressure.

Inquire Now

Gasoline pump assembly F3

F3D-1106010-B1

Provides fuel under pressure to the engine fuel injection system

Inquire Now

Intake manifold

473QD-1-1008100

F3

Inquire Now

Steam filter

F3-1105110

The main function is to filter out impurities in gasoline

Inquire Now

Fuel tank cap F3

F3-1100110

A fuel cap is a box on a car that is used to store gasoline. The shape is square, made of stainless steel, and has a good seal. There is only a small round entrance, which is only as big as the cap of the bottle, for easy storage. Usually on the back of the car

Inquire Now

Throttle body assembly F3

476Q-1D-1107950-B

A controllable valve that controls the intake air flow of the engine and determines the operating conditions of the engine.

Inquire Now

Intake pressure sensor

473QE-3611500

The intake pressure sensor provides engine load information and intake temperature information, which can convert the pressure of the engine intake pipe into a corresponding electrical signal. The engine electronic controller calculates the basic fuel injection time, fuel injection amount and ignition advance angle according to this signal.

Inquire Now

Idle motor

476Q-1D-1107801

When idling, according to the engine temperature and load, change the cross-sectional area of the idling air passage, so that the engine has the best idling speed under different conditions.

Inquire Now

Empty filter housing F3

F3D-1109130

F3, F3R, G3,L3,G3R,brand newF3,third generationF3

Inquire Now

Air filter hose

F3-1109111

The air cleaner hose connects the air cleaner to the throttle body. Every time the driver steps on the gas pedal, a valve in the throttle body opens, allowing filtered air to flow to the intake manifold.

Inquire Now

Ignition coils F3

476Q-4D-3705800

The function of the ignition coil is to convert the low-voltage direct current into high-voltage electricity, and the voltage can reach tens of thousands of volts, which is generated by the breakdown of air ionization by the spark plug in the cylinder. electric spark

Inquire Now

High voltage line

471Q-3707801_1

F3,G3,F3R

Inquire Now