CS35

CS35

  • Generator Model 193G

    3701010-B05/H16010-0901

    When the engine is running normally, power is supplied to all electrical equipment except the starter, and the battery is charged at the same time. The generator is the main power source of the car.

  • Generator tensioner

    1000390-B01/H15007-0300

    The function of the tensioner is to guide and tighten the engine timing belt or timing chain.

  • Engine hood with strainer

    1003110-W02/S101127-0101

    CS35

  • Fan belt 6PK1945

    1503050-U01/C201030-3000

    The role of the timing belt is to link the upper and lower parts. The upper connection is the timing wheel of the engine cylinder head, and the lower connection is the crankshaft timing wheel.

  • High Voltage Line C201

    37070(3/4/5/6)0-B01/H15015-0200

    The high-voltage line of the car is a kind of "wire" with an "insulation" device that transmits electrical energy through the ignition coil for the ignition of the spark plug, thereby allowing the engine to do work.

  • Throttle body assembly

    1000800-B03/H16008-1400

    CS35

  • Intake manifold B04

    1008010-B04-AA/H16008-1201

    EADO/CS35/V7

  • Air filter hose Intake pipe

    1109020-W01/S101014-0100

    The air cleaner hose connects the air cleaner to the throttle body. Every time the driver steps on the gas pedal, a valve in the throttle body opens, allowing filtered air to flow to the intake manifold.

  • Air filter hose outlet pipe

    1109030-W03/S101014-0300

    The air cleaner hose connects the air cleaner to the throttle body. Every time the driver steps on the gas pedal, a valve in the throttle body opens, allowing filtered air to flow to the intake manifold.

  • Empty filter housing

    1109010-W01/S101014-0200

    It plays the role of filtering out dust and sand in the air, and ensures that sufficient and clean air enters the cylinder.

  • Exhaust manifold gasket

    1000330-B01/H15009-0700

    Installed at the connection between the exhaust manifold and the engine, it acts as a seal

  • Fuel injector

    1000630-B04-AA/H16008-1800

    The functions of the fuel injector are: 1. It is conducive to full combustion; 2. It injects fuel into the engine.

  • Starter Model 124B

    3708010-B03/H15010-0200

    The function of the car starter is that the starter can convert the electric energy of the battery into mechanical energy, and drive the engine flywheel to rotate to realize the starting of the engine.

  • Gasoline pump assembly

    1106100-W01/H16089-0100

    The functions of the fuel pump assembly are as follows: 1. The electric fuel pump is an important part of the electronic gasoline injection system of the automobile engine; 2. Its basic function is to provide fuel with a certain pressure to the engine fuel injection system.

  • Gasoline pump assembly China VI W04

    1106100-W04/H16089-0103

    The functions of the fuel pump assembly are as follows: 1. The electric fuel pump is an important part of the electronic gasoline injection system of the automobile engine; 2. Its basic function is to provide fuel with a certain pressure to the engine fuel injection system.

  • Crankshaft Position Sensor 39310-3C100

    3781030-B01/H15005-2000

    The function of the crankshaft position sensor is to control the ignition timing of the engine and to confirm the signal source of the crankshaft position.

Product Category

Contact Us

Tel: +86 18660183999

Email: admin@cnjkautoparts.com

Add.: No. 299, Jisheng Road, Xuancheng Economic and Technological Development Zone, Anhui Province, China

Subscribe Newsletter

Welcome to subscribe to our email message!

Copyright © Shandong Jikong Auto Parts Co., Ltd. All Rights Reserved | Sitemap Reanod
Inquiry List(0)
Already in the Inquiry List!
Added successfully!